Exterior Paint


INTEK Weather Care Emulsion Paint is a superior quality algae and fungi resistant emulsion paint for high performance under severe weathering conditions.

· Excellent durability

· Excellent alkaline resistance

· Excellent adhension

· Contain high effective non-mercurial algae and fungus control additives

· Excellent colour fastness

· Washable and stands up well to efflorescence

· Dirt pick-up resistance

Intended uses:

Special formulate for the protection and decoration of:

· Exterior masonry and renderings

· Unpainted and previously painted surfaces

Such as: plaster, cement, asbestos, brickwork, hard and soft-boards, on appropriately primed wood and metal surfaces.


Method of application: brush, roller, air spray

Paint preparation: ready for use after thorough stirring. If thinning is necessary, not more than 15% of water may be added for the first coat. For best result, thinning is not recommended for the subsequent coats.


Surface Preparation:

1.    For New Surfaces:

It is crucial that ample time is allowed for the concrete/ plaster surfaces to dry out. High moisture content is a common cause for premature paint failures, such as blistering, discoloration, ect. Concrete/ plasters are alkaline in nature and together with the presence of salts and moisture may cause paint system to fail prematurely.

Masonry surfaces must be reasonable dry and free from oil/ grease and other contaminants before an appropriate alkali resistance sealer is applied.

2.    For Old Surfaces:

Surface must be dry and free from any structural damages and cracks. Wash the surface to remove any vegetable growths, stains, debris and powdery coating by high pressure water jet. Fungicidal wash should be used as a wash and left for 48 hours before final rinse with clean water. This will ensure most algae spores are killed.

For old paintwork that is sound and has good adhesion. Wash off dirt and surface powder with clean water or brushing before painting with INTEK Weather Cover.

For poor paintwork which is powdery, chalky and poor in adhesion, it is crucial to remove the old paintwork by scraping or by brushing with a stiff bristle before the full painting system is applied.